Rinse first
Remove loose dirt before a mitt touches the panel.
IGL Coatings
Made in Malaysia
IGL Coatings Ecoclean Wash - 500 ml
SKU: FG000007
About this item
- Concentrated shampoo for regular contact washing.
- High lubricity with controlled, low foam.
- Suitable for coated and uncoated paint.
- Bucket dilution: 20 ml per 10 litres of water.
- 500 ml bottle provides 25 mixes at that bucket dilution.
Key details
- Brand
- IGL Coatings
- Product type
- Car Shampoo
- Model / SKU
- FG000007
Product description
Make the contact wash a controlled, well-lubricated part of your routine. IGL Ecoclean Wash cleans coated and uncoated paint with a low-foam formula that rinses away cleanly.
What it does
Use a measured mix and a clean mitt after loose grit has been rinsed away. For a 10-litre bucket, 20 ml gives the stated 1:500 dilution - 25 bucket mixes from a 500 ml bottle.
Where to use it
Coated and uncoated paint, compatible PPF, vinyl wraps and exterior trim. Work on cool panels and rinse before the shampoo dries.
How to use it
Pre-rinse the vehicle. Mix 20 ml in 10 litres of water for hand washing. Wash from the top down, cleaning the mitt frequently. Rinse thoroughly and dry with clean towels. For foam-cannon use, mix 1:10 in the cannon bottle.
Size: 500 ml.
Product information
- Brand
- IGL Coatings
- Product type
- Car Shampoo
- Model / SKU
- FG000007
- Size
- 500 ml
A measured mix. A cleaner wash.
Ecoclean Wash is for the contact stage: a lubricated mitt, a cool vehicle and a careful top-to-bottom routine. It maintains coated and uncoated exterior surfaces without needing a wall of foam.
Hand wash stage
The job
Let the shampoo do its job.
Work with a clean mitt and a measured shampoo mix. Rinse away loose dirt first, clean the mitt frequently and leave the lower panels until last.
Choose it when
You are washing the vehicle by hand after a rinse or pre-wash.
Consider an alternative when
You want a richer foam pre-wash. Blizzard can be used before the contact stage.
Use it well
Get the application right.
Follow the current dilution directions for your water volume and equipment.
Mix and wash
For a bucket wash, use 20 ml per 10 L water. Work from roof downward with a clean mitt.
Rinse and dry
Rinse before the solution dries and dry with clean microfibre towels.
Mix your bucket
Bucket washing only. Use a measuring cup for accurate dosing.
Product needed
Find your fit
Which product fits your job?
Choose the job below to compare the right products for your routine.
IGL Coatings
IGL Coatings Ecoclean Wash - 500 ml
Low-foam shampoo with a measured bucket dilution.
€13,70Choose this product
IGL Coatings
IGL Coatings Ecoclean Blizzard - 500 ml
Blizzard for the foam-cannon pre-wash stage.
€19,79View product
IGL Coatings
IGL Coatings Ecoshine Enhancer - 500 ml
Enhancer for freshly washed surfaces.
€16,96View productThe practical details
Before you get started.
Answers to the questions that matter before ordering and applying.
Ask us about your vehicleHow much shampoo goes into a 10-litre bucket?
Use 20 ml with 10 litres of water for the 1:500 bucket dilution.
Why is there less foam than with Blizzard?
Wash is a low-foam, high-lubricity shampoo. Blizzard gives richer foam for a dedicated pre-wash or a foamy bucket wash.
Is it suitable for ceramic-coated paint?
Yes. It is designed for maintaining coated and uncoated paint without stripping existing protection when used as directed.
Can I use it through a foam cannon?
Yes. Use a 1:10 mix in the cannon bottle. Rinse and complete the contact wash as required.
What should I use after rinsing?
Ecoshine Enhancer can be used as a drying aid or finishing detailer on the clean surface.